Re: 2010 Equinox, ABS issue w/stabilitrack light activating and no awd message
Just had this happen on my '11 Terrain, brake pedal pulsing at low speed, and when the vehicle reaches 15-20mph, the ABS Light, Stabilitrak Light illuminate and I get the messages "Service Stabilitrak", "AWD Disabled" messages in the display. The codes I have though are C0040-06 (Right Front Wheel Speed Sensor Circuit-Low Voltage/Open), and C0040-5A (Right Front Wheel Speed Sensor Circuit-Not Plausible). Replaced the right front ABS Sensor, cleared ABS codes, and they came back after the test drive. Seems like these Theta platforms might have some wiring problems? Already cleaned the connector for that sensor, no change. Gonna go trace that wire and look for loose/broken wires or connectors. Had to buy a new scanner to check these codes, went to autozone and bought an Innova 3040C scanner. So I cant be sure if these specific codes are scanner specific or OBD/GMC specific. Just thought I'd clarify that.
2011 GMC Terrain SLE-1 <br />2.4L L4 AWD QuickSilver Metallic